Based Glass CFL Experimental Crystal Growth Cap
Based Glass Crystal Growth Carb Cap
CFL Experimental Glass
Crystal Growth Design
Fits Up to 25MM Flattops
Just fits XXL Quave or Comparible
Single Hole Airflow
Made by Based Glass
Made In Nevada
Based Glass Illuminati Crystal Growth Cap
Based Glass Crystal Growth Carb Cap
Black light Reactive Illuminatti Glass
Crystal Growth Design
Fits Up to 25MM Flattops
Just fits XXL Quave or Comparible
Single Hole Airflow
Made by Based Glass
Made In Nevada
Rudeboy Glass Cheeto Dabber
Rudeboy Glass Cheeto Dabber
Cheeto Design
Approx 2.5" Long .25" Wide
Cheetos Vary, 1 Per order
Made In Colorado
Shamy Glass Blue Bubbler
Worked Shamy Glass Bubbler
Detached Push
Fume Throughout
Attached Matching Marble
Approx 4.5" Tall 3" Wide
Made In New Jersey
Rudeboy Glass Bubblecap
Rudeboy Glass Orange Bubblecap
Chester Print Design
Approx 3.5" Long 1" Wide
Fit both 25mm and 30mm
Bubblecaps Vary, 1 Per Order
Made In Colorado
Shamy Glass Orange Bubbler
Worked Shamy Glass Bubbler
Detached Push
Fume Throughout
Attached Matching Marble
Worked Rainbow Sections
Approx 5" Tall 3" Wide
Made In New Jersey
Gavel V2 14mm/M/55?
Gavel V2 14mm/M/55°
Made by Highly Educated
Why 55 degree? The 55° Gavel is a response to
a cross-brand issue that arises from true 45° nails. By adding an
additional 10° to the angle, we change the direction of the angular
force being applied on the outside wall of the bucket by dabbers and
cotton swabs, making it much less likely to slip out during operation
and cleaning. Previously the only benefit in having a true 45° was if
the joint you are going to be matching with is also a true 45°,
resulting in a flat level bucket. It has been our experience that the
majority of joints we are connecting to are not true 45° angles, so we
see the additional 10° being added as non problematic in that regard.
Introducing the Gavel, an opaque bottom quartz banger style
nail from Highly Educated. For fans of both the banger style and the
flavor that our opaque material offers. This nail features a 4mm thick
layer of our 99.99% pure SiO2 opaque quartz on bottom with 2.5mm thick
clear fused quartz walls and a 25mm diameter bucket. The opaque floor
heats up much faster than traditional clear fused quartz, but can still
hold heat well exhibiting wait times in excess of 80 seconds. The logo
has been laser engraved into the joint keeping the branding subtle, but
permanent. The chamfered edges on the top are made to accommodate a
better fit for most bubble caps. The opaque surface is slightly textured
which assists in the formation of nucleation sites at exceeding lower
temperatures. The material science, and surface science behind the Gavel
are quickly making it an industry favorite.
